Wilson 811201 3 Watt Direct Connection (Inline) Dual-Band Amplifier can be used for mobile, marine and in-building use.
The Wilson 811201 Dual Band amplifier improves signal on both cellular (824-894 MHz) and PCS (1850-1990 MHz) bands. It is a direct connect amplifier so it puts the improved signal directly into your cell phone or cellular data card through a coaxial cable and adapter.
- Requires a physical cable connection to your phone or cellular data card
- No signal loss with the direct connection
- Best performance in rural or remote locations
- Can be used in buildings or in vehicles
- Adapters are available for most phone and cellular data card models
- Must have an external antenna
Features |
Improves voice and data signal quality Improves data communication rates needed for 3G technologies Power control logic ensures maximum output power is within cellular network standards Automatic gain control Automatic shutdown on overload. Advanced electronics receive and transmit better than a cell phone or cellular data card Connects directly to a cell phone or cellular data card with a Wilson antenna adapter (sold seperately) Mobile, marine and in-building use DC power supply included - AC power supply sold separately Greatly reduces disconnects, drop outs, and noise Transmits signal energy to the outside antenna FCC and IC type accepted
|
|
Specifications |
Part Number | | 811201 | Frequency | | 824-894 MHz / 1850-1990 MHz | Gain | | 10 dB / 14 dB | Max Output Power | | 3 watts | Max RF | | +35 dBm / +15 dBm | Noise Figure | | 3.5 dB nominal | Flatness | | ± 2 dB / ± 2 dB | Isolation | | > 90 dB | Power Requirements | | 12 V, 0.5-1.5 A max | Connectors | | FME-Male 50 ohms | Dimensions | | 5.5 x 4.3 x 1.4 (inches) or 14.0 x 10.8 x 3.5 (cm) | Weight | | 1.32 lbs or 0.6 kg |
|
The Wilson 811201 and 812201 Amplifier Systems comes with an amplifier and a power cable that plugs into a 12-volt cigarette lighter adapter. You will also need at least one outside antenna and at least one length of coaxial cable with adapter that connects the antenna to the amplifier for mobile use.
Antennas, cables and a 120-volt AC/DC power supply for in-building use are sold separately.
This product was added to our catalog on Saturday 19 November, 2005.
